eSCOPE ELITE8

NEWLY ADDED DTC Stop Scope feature allows the Automotive Test Solutions eSCAN ELITE (purchased separately) to stop the eSCOPE ELITE Deep Record when a pending, or permanent DTC is set. This ensures a data capture at that moment.

Capture All Data: ATS’ unique circular buffer system does not drop data. No data gap will ever be present on our scopes; this means you will never lose data that occurs between samples on an intermittent fault or fail to capture the vehicle’s faulty event.

Ultra Sharp Wave-forms: No need for filters that can mask data. ATS designs our scopes so the signal is accurate and clean.

Dual Time Base: This allows two different frequencies to be displayed on one screen with two different scope displays, simultaneously. This also allows separate triggers and/or trigger modes on each time base. It’s like having two scopes in one.

Pull Down Circuit: A Controlled pulse that sinks power from vehicle circuit to ground. Control circuits like ignition coils, fuel injectors and solenoids.

TTL Output: Sends a 0-5v square wave signal out of scope. Turn on devices such as ignition coil drivers, test vehicle’s circuits, and test vehicle’s circuits for loading.

Automatic Test Lead Connection Detection: This unique feature allows you to know the scope lead has a good connection. “Red”= Bad connection. “Green”= Good connection. It’s that easy!

No Time, Voltage, or Trigger Setup Needed: With the powerful Deep Record function, you can grab a large amount of data without any setup at all. Then simply zoom in to see what happened! Turn signals on/off, and rearrange waveforms as you wish. Saved files can be reopened and manipulated in the same way at any time.

Automatic voltage attenuator: Just change the voltage setting and the scope does the rest.

Pressure Transducers: Drives four pressure transducers at once with full pressure/vacuum conversions.

Patented Overlay Technology: ATS’ unique programming overlays an engine cycle grid over your waveforms. Works great with pressure transducers!

Which Is Best For You?

ELITE8

  • 8-Channel Scope
  • Separate colors for each channel that match leads
  • 16 bit (65,536 discrete levels).  This gives very fine voltage resolution over a very large voltage range.  I.E. +/-20 volt range has a 0.0006 mV resolution
  • 1 Mega samples per second
  • Up to +/-500V software selectable attenuator built into scope
  • Dual Screen, Single Screen, Stacked Scope, Measure and Deep record, and Meter
  • Deep Record Mode. Record data without any setup at all and without missing any data
  • Drives four pressure transducers at once with full Pressure / Vacuum conversions and patented pressure transducer overlays
  • Ignition analyzer
  • PC Compatible. Will NOT run on the Microsoft Surface Pro X ARM64-based PC with the Microsoft SQ1 processor
  • Powered via PC’s USB 2.0 or 3.0 connector
  • Unlimited Storage of waveforms and settings
  • Built in help plus U.S. based customers receive live one-on-one log in support

ELITE8 with Surface Pro

  • 8-Channel Scope
  • Separate colors for each channel that match leads
  • 16 bit (65,536 discrete levels).  This gives very fine voltage resolution over a very large voltage range.  I.E. +/-20 volt range has a 0.0006 mV resolution
  • 1 Mega samples per second
  • Up to +/-500V software selectable attenuator built into scope
  • Dual Screen, Single Screen, Stacked Scope, Measure and Deep record, and Meter
  • Deep Record Mode. Record data without any setup at all and without missing any data
  • Drives four pressure transducers at once with full Pressure / Vacuum conversions and patented pressure transducer overlays
  • Ignition analyzer
  • PC Compatible. Will NOT run on the Microsoft Surface Pro X ARM64-based PC with the Microsoft SQ1 processor
  • Powered via PC’s USB 2.0 or 3.0 connector
  • Unlimited Storage of waveforms and settings
  • Built in help plus U.S. based customers receive live one-on-one log in support
  • Surface Pro 7 Tablet

ELITE8 with iEA Intelligent Engine Analyzer

  • 8-Channel Scope
  • Separate colors for each channel that match leads
  • 16 bit (65,536 discrete levels).  This gives very fine voltage resolution over a very large voltage range.  I.E. +/-20 volt range has a 0.0006 mV resolution
  • 1 Mega samples per second
  • Up to +/-500V software selectable attenuator built into scope
  • Dual Screen, Single Screen, Stacked Scope, Measure and Deep record, and Meter
  • Deep Record Mode. Record data without any setup at all and without missing any data
  • Drives four pressure transducers at once with full Pressure / Vacuum conversions and patented pressure transducer overlays
  • Ignition analyzer
  • PC Compatible. Will NOT run on the Microsoft Surface Pro X ARM64-based PC with the Microsoft SQ1 processor
  • Powered via PC’s USB 2.0 or 3.0 connector
  • Unlimited Storage of waveforms and settings
  • Built in help plus U.S. based customers receive live one-on-one log in support
  • Surface Pro 7 Tablet
  • iEA Software License
  • Compression adapters (14mm, 18mm)
  • Pressure transducer cables
  • iEA Amplifier
  • Exhaust Tailpipe hose
  • iEA Spark test with RF Filter
  • iEA Exhaust Sensor
  • -30 hg Vacuum Transducer
  • 300 psi Transducer
  • 500 psi transducer
  • Vacuum Test Hose
  • Hose Adapters with Quick Coupler

Looking for more Information?

Click the links below

LEARN MORE

 

link to come